Kuryakyn 9529 ALLEY CAT for BOLT - Manual (Page 4)

PAGE
4
STEP 17
Locate the Velocity Plate in the kit. Position the Velocity Plate on the Backing Plate so that the
slots align as shown in PIC 10.
STEP 18 Refer to PIC 11. Align the Spider Bracket with the slots in the Backing Plate and
Velocity Plate. Attach it to the Backing Plate with the supplied #8-32 X 3/8” Flat
Socket Cap Screws.
STEP 19 Locate the Air Filter Element in the kit. Refer to PIC 11. Rotate the Air Filter until
it aligns with the Spider Bracket hex stud.
STEP 20
Locate the included Double-Ended Stud in the kit. Insert the longer end of the
Stud through the outside of the Alley Cat Cover as shown in PIC 12.
STEP 21
Place a drop of blue thread locker on the longer end of the Double-Ended Stud. Place the
Alley Cat Cover over the Filter and secure to the Spider Bracket with the Stud. Torque to
36-60 in/lbs. The Stud may need to be loosened a bit to line up the flats on the Stud with
the dowels on the chrome Cover as shown in PIC 13.
STEP 22
Align the indents in the Nylon Ratchet with the dowels on the chrome Cover as shown in
PIC 13.
STEP 23 Refer to PIC 14. Place a drop of blue thread locker on the exposed threads of the
Stud; thread the Tri-Bar fastener onto the Stud. There are teeth on the Ratchet
Ring that the teeth on the Tri-Bar will engage to help hold the it in place. The Tri-
Bar only needs to be finger tight! DO NOT over tighten it!
STEP 24
Ensure the tightness of all related fasteners, check for hose clearance and check
throttle for correct operation, making sure it returns properly, BEFORE starting
the bike.
ALLEY CAT for BOLT
Ride On!
INSTALLATION
It is the end user’s responsibility to ensure that all of the
fasteners (including pre-assembled) are tightened before
operation of the motorcycle. Küryakyn will not provide war-
ranty coverage on products or components lost due to im-
proper installation or lack of maintenance. Periodic inspec-
tion and maintenance are required on all fasteners.
Some of our high performance air cleaners extend beyond
the stock/OEM unit to achieve smoother air flow and better
performance. Riding position may be affected, so it is impor-
tant to familiarize yourself with the new riding position.
PIC 13
LINE UP FLATS ON STUD WITH DOWELS ON
COVER THEN NOTCHES ON RATCHET WILL LINE
UP WITH DOWELS
PIC 12
LONG END
OF STUD
PIC 11
SPIDER BRACKET
PIC 14
HEX STUD
PIC 10
VELOCITY PLATE
ALIGN SLOTS
If the OEM exhaust system is replaced or altered
(in addition to replacing the air cleaner), then
install Kuryakyn P/N 9218 Wild Things Fuel Con-
troller to prevent a “lean” fuel/air mixture that
can result in over heating leading to engine dam-
age.