Kuryakyn 1757 LIGHTED MIRROR STEM COVERS - Manual (Page 4)

PAGE
4
STEP 13
Route the wire harnesses from each Mirror Stem Light under the fuel tank to the 8-Pin Run-Turn
wiring adapter or 3-Pin hardwire connectors just installed. Secure the harnesses out of harms way
using the included cable ties and cord keepers.
Secure all wiring away from any moving parts, pinch points or extreme heat.
Küryakyn WILL NOT issue a warranty on any electrical component that fails due to
pinched, crimped, broken, abraded, melted or frayed wires.
STEP 14
Place some of the included dielectric grease on each connector. Connect the three pin connector
on the wire harness from the LEFT Mirror Stem Light to three pin connector on the 8-Pin
Run-Turn wiring adapter with the PURPLE-BLACK-BLUE wires. PIC 10 Connect the three pin
connector on the wire harness from the RIGHT Mirror Stem Light to three pin connector on the
8-Pin Run-Turn wiring adapter with the BROWN-BLACK-BLUE wires. PIC 10
STEP 15 Turn the bike on and test that all lights function correctly.
ENSURE PROPER LIGHT OPERATION BEFORE RIDING THE MOTORCYCLE.
VISIBILITY IS A MAJOR CONCERN FOR MOTORCYCLISTS. A LIGHT
MALFUNCTION COULD RESULT IN DEATH OR SERIOUS INJURY.
STEP 16
Replace the seat.
AFTER INSTALLING THE SEAT, PULL UP ON IT TO ENSURE IT IS LOCKED
INTO PLACE. A LOOSE SEAT CAN SHIFT AND CAUSE LOSS OF CONTROL-
RESULTING IN SERIOUS INJURY OR DEATH.
Ride On!
LIGHTED MIRROR STEM COVERS
INSTALLATION