KOCASO NB1400A - Manual (Page 29)

27
Telecom formats 3G on the card, phone number need to fill in the column "T#777",
APN do not need to fill in the name of column.)
User and Password: If you use the standard of China Unicom and China Mobile's 3G
network card, user and password fields are free to fill or not fill; if you use the
standard of China Telecom's 3G network card, user and password fields need to fill
in( user: card, password: card).
Note: If enter the above user and password does not work properly. Please make try to
fill in (user: ctnet@mycdma, password: vnet.mobi) or (user: ctnet, password:
vnet.mobi), also you can request to China Telecom.
Fill then click the link, and you will see the bottom of status bar 3G symbol
appears, indicating the completion of 3G is connected, and then you can get online.
GPS
GPS functionality requires the use of a USB interface external GPS receiver. (It
access to device via the USB host transfer cable). Users need to download the
navigation software and map from the internet, through the SD card installation
(please refer to the Application Management section of this User Guide). The
currently supported on the GPS receiver type please refer to Appendix.
PPPoE Settings
Before using this feature, connect the USB network card via the USB host transfer
cable access to device.
1. Tap Settings → PPPoE settings .
2. Input name and password then click connect to access the broadband network.
Ethernet
Before using this feature, connect the USB network card via the USB host transfer
cable access to device. When the USB network cable plugged into the USB network
card, you will see the bottom of status bar ETH symbol appears
1. Tap Settings → Ethernet.
2. The device can automatically obtain IP address to connect to the network. You can
also choose to manually set the IP address to get connected.