Setting the flash time for the recall key, Recall key (in public telephone systems), Using the repertory keys as "function keys – Siemens Euroset 5015 User Manual
Page 6: Example: call forwarding
euroset 5015 / IM en-fr-ru-hr / A30350-M208-A801-2-UP19 / 5015.fm / 18.01.2006
6
EN
Setting the flash time for the Recall key
c?195
Lift handset, initiate function.
0
...
4
Enter desired flash code:
0: 90 ms (default setting);
1: 120 ms;
2: 270 ms;
3: 375 ms;
4: 600 ms.
?a
Press the Set key. Replace handset.
Using functions for additional services of
public telephone systems
If you want to use services that are to be triggered with the
Recall key, make sure beforehand that the correct flash time
is set for the key.
Recall key (in public telephone systems)
In public telephone systems, this key is required to use
certain additional services.
The appropriate flashtime for the specific country must be
set before using the Recall key can be used:
◆
Belgium, Netherlands, Switzerland: 120 ms
(access code 1)
◆
France, Luxemburg, Portugal, Germany, Greece: 270 ms
(access code 2)
◆
other European countries: 90 ms (access code 0).
Using the repertory keys as "function keys"
Different public telephone services/functions – possibly by
order/request – can be selected via predetermined key com-
binations which you can obtain from your network provider.
You can save the necessary key combinations like normal
phone numbers on repertory keys and similarly "select" and
also deactivate the service again.
Note:
If you activate the symbol display and save the function calls
on the 2nd level of the repertory keys, you can link the
activation and deactivation of different services for each
"function key" with the display or hiding of certain symbols
on the display.
Therefore, when setting the repertory keys on the 2nd
level, bear in mind that activating and deactivating the dis-
play symbols
™
,
˜
,
—
and
ë
is linked to very specific
keys in the 2nd level – regardless of the phone numbers or
function calls stored on it!
Deactivating/activating the symbol display for additional
services
Displaying the symbols can be activated or deactivated as
needed. In the default setting, the display is deactivated.
c?145
Lift handset, initiate function.
0
/
1
0: deactivate; 1: activate.
?a
Press the Set key. Replace handset.
Recommended assignment of symbols to keys
When the symbol display
=
is activated and you then
press one of the following repertory keys, the display sym-
bol assigned to each is activated or deactivated respectively
(key numbering from top to bottom):
Example: Call forwarding
In the following, you will see an example of repertory keys
used as "function keys". If the symbol display is activated, in
the "call forwarding" example when the service is activated,
the symbol provided for it is displayed, or hidden when the
service is deactivated.
The key sequence for activating the function "call forward-
ing immediately" from your network provider consists of
e.g. three parts:
You now have the following options:
◆
You can dial the entire key sequence each time on the
keypad.
◆
You can save the key sequence on repertory keys as an
entire function together with the phone number of a
set forwarded call destination
=
+
Assignment
Display
icon
:
1
Call forwarding immediately
off
™
:
2
on
:
3
Call forwarding on no reply
off
˜
:
4
on
:
5
Call forwarding when busy
off
—
:
6
on
:
7
Call waiting
off
ë
:
8
on
Select function
Forwarded call destination End of
function
*21*
Phone number of the
forwarded call destination
#