Saving numbers, Saving repertory numbers, Adjusting the telephone – Siemens Euroset 5015 User Manual
Page 3: Adjusting the ringer volume, Setting the ringer frequency, Setting the ringtone, Setting the handset volume, Mute
euroset 5015 / IM en-fr-ru-hr / A30350-M208-A801-2-UP19 / 5015.fm / 18.01.2006
3
EN
Saving numbers
Different telephone settings must be completed with the
Set key
?
so that they are available permanently.
In order to cancel without saving, e. g. after an incorrect
entry, replace the handset instead of pressing
?
at the
end. The original setting is then retained.
Saving with notebook function
You can also save phone numbers during a conversation
with the notebook function.
Saving repertory numbers
You can save up to 20 phone numbers (or even functions,
see page 6) on both levels of the repertory keys.
c?
Lift handset, press the Set key. (For 2nd mem-
ory level, also press
=
.)
:
Press the repertory key under which you want
to save the repertory number.
A number that has already been saved is
shown in the display. If the memory for this
repertory key is empty, z appears in the display
o
Enter the number to be saved (up to 32 digits).
or ...
Saving from the redial list:
;
...
;
Press the Redial key repeatedly until the
desired phone number is displayed on the
screen.
?a
Press the Set key. Replace handset.
Pressing
<
allows you to save pauses (not at the 1st digit).
After the 20th digit, any following digits are moved from
right to left in the display.
Delete all repertory numbers
c?1251
Lift handset, initiate function.
?a
Press the Set key. Replace handset.
Adjusting the telephone
Adjusting the ringer volume
The volume of the ringer can be set to one of 7 levels and
can also be deactivated completely (default setting: level 7,
highest level) or deactivated completely. When the ringer is
deactivated an incoming call is notified in the display only.
◆
To adjust when the telephone is idle:
c?5
Lift handset, initiate function.
H
...
I
Adjust the volume with the Loud/Quiet key.
?a
Press the Set key. Replace handset.
◆
To adjust while the telephone is ringing:
Press
H
...
I
before lifting the handset.
The last value set is saved.
Setting the ringer frequency
The frequency (speed) of the ringer can be set to one of
three levels (default setting: level 3).
c?6
Lift handset, initiate function.
1
...
3
Press one of the keys 1...3:
1: highest frequency; 3: lowest frequency.
?a
Press the Set key. Replace handset.
Setting the ringtone
Ten different ringtones can be set for the ringer (default
setting: ringtone 0).
c?7
Lift handset, initiate function.
0
...
9
Press one of the keys 0 ... 9
?a
Press the Set key. Replace handset.
Setting the handset volume
The volume on the handset can be set to one of 3 levels and
saved (default setting: level 1).
c?9
Lift handset, initiate function.
H
...
I
Adjust the volume with the Loud/Quiet key.
?a
Press the Set key. Replace handset.
Mute
You can deactivate the telephone's handset and
microphone. Then the other party can no longer hear you.
J
During a call: Press the Mute key
Activate: Press the key again.