Siemens Euroset 5015 - Manual (Page 2)

euroset 5015 / IM en-fr-ru-hr / A30350-M208-A801-2-UP19 / 5015.fm / 18.01.2006
2
EN
All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
This crossed-out wheeled bin symbol on the product means the
product is covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance
will help prevent potential negative consequences for the
environment and human health. It is a precondition for reuse and
recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Preparing the telephone for use
Recommended installation of telephone
◆ Do not expose the telephone to direct sunlight or other
sources of heat.
◆ Operate at temperatures between +5°C and +40°C.
◆ Maintain a distance of at least one metre between the
telephone and radio equipment, e.g. wireless
telephones, wireless pagers or TV sets. Otherwise,
telephone communication could be impaired.
◆ Do not install the telephone in dusty areas as this can
shorten the service life of the telephone.
◆ To clean, wipe with a moist or antistatic cloth only, never
with a dry cloth (risk of electrostatic charging and
discharge) or harsh cleaning agent.
◆ Furniture lacquer and polish can be damaged by contact
with parts of the unit (e.g. device feet).
Connecting
Insert the short end of the coiled handset cord in the socket
provided in the handset and the long end in the socket
marked with an a on the underside of the device. Plug the
phone cord into the outlet on the wall and the other end
into the socket marked with a Y on the underside of the
device. Then your telephone is ready to use.
Making calls
Dialling a number
co Lift handset, dial number.
Any digits after the 20th digit are moved from right to left in
the display. The Pause key < can be used to insert pauses
when dialling, starting from the 2nd digit.
Last number redial (one of the last 5 call numbers)
The last 5 different call numbers dialed are automatically
saved (max. 32 digits each).
c Lift handset (or press the Loudspeaker key L
until the dialling tone is audible).
; ... ; Press the Redial key repeatedly until the
required call number appears with the place
number (1...5 on the left).
o Enter the place number (1...5).
The relevant call number is redialed.
Dialling using the repertory keys
c Lift handset (or press the Loudspeaker key L
until the dialling tone is audible). (If necessary,
press = for a 2nd level repertory key).
: Press repertory key.