Kifco E30x660 400,000 - Present Operator Manual - Manual (Page 13)

P/N 19302460 Copyright © May 2013 by Kifco ® Inc.
Machine Controls
1
1
Tongue Jack
2
Turntable Lock Pin
(See Photo 1)
3
Anti-Return Pawl
(See Diagram 1)
4 Three Step Pulley Belt Tensioner
5
Stabilizer Leg Crank Handle
(Non-Hydraulic Models Only)
6 Cart Transport Lift Crank Handle
7 Compensator Bar/Shut Off Bar
2
3
4
5
6
7
Turbine
Drive ST3
Pictured
The controls pictured here are the same for turbine or engine drive systems and for alter-
nate chassis sizes (unless otherwise noted). Controls that are specific to the drive system
are show in the “Start-up & Operation” section of this manual.
Photo 1
Turntable Lock Pin
Diag. 1
Anti-Return Pawl
7