Kargo Master (40963/40943) Drop Down Mechanism Only (40953) - Manual (Page 4)

4
Step 6
Next install the “Axles” and “Rollers” at the end of both front and rear crossbow. The “Axle” just slides in and the “Rollers” slide
over the ends of the “Axle” as shown below.
Step 7
Next install the “Ladder Pan Assy.” Align cutouts in “Ladder Pan Assy.” with the “Rollers” and guide the arms onto the “Torque
Tube Pivot Assy.” As you lower the assembly onto the rollers. Insert 5/16”x 2” bolts with flat washer and nylock nuts through
arms and “Torque Tube Assy.” Make sure the “Rear Ladder Pan Assy.” is on the rear crossbow.