Kargo Master (40963/40943) Drop Down Mechanism Only (40953) - Manual (Page 3)

3
Step 4
Next attach the “Dampener” to the rear bow assembly. Make sure the “Torque Tube Pivot Assy.” is rotated so the cam is pointed towards
the center of the van. Attach the shaft end of the “Dampener” to the cam using the 5/16” pin, make sure the cotter pin is secure. Now
attach the body end to the “Dampener mounting Bracket” using the 5/16”x2 1/4” pin.
Step 5
Attach the “Latch” To the rear bow assy. as shown below using 5/16”x3/4” carriage bolts with flat washers and nylock nuts.