JULABO FLW11006 Recirculating Coolers - Manual (Page 31)

31
Cleaning:
Clean the outside of the unit using a wet cloth and low surface tension
water.
The recirculating cooler is designed for continuous operation under
normal conditions. Periodic maintenance is not required.
The tank should be filled only with a bath fluid recommended by
JULABO. To avoid contamination, it is essential to change the bath fluid
from time to time.
Repairs:
Before asking for a service technician or returning a JULABO instrument
for repair, please contact an authorized JULABO service station.
When returning the unit:
 Clean the unit in order to avoid any harm to the service personnel
 Attach a short fault description.
 When returning a unit, take care of careful and adequate packing.
 During transport the unit has to stand upright. Mark the packing
correspondingly.
 JULABO is not responsible for damages that might occur from
insufficient packing.
JULABO reserves the right to carry out technical modifications with
repairs for providing improved performance of a unit.