Johnson Systems J-PACK Series Dimmers User Manual
Page 13
13
WWW
.JOHNSONS
Y
STEMS.COM
MAAD-6
REV.1
1240
MADE IN CANAD
A
SERIAL NUMBER
WARNING: AC LINE VOLTAGE
MAAD-6
REV.1
1240
5-Pin XLR Connection Details (Pinout)
Pin 1 = DMX Shield / Common
Pin 2 = DMX Data-
Pin 3 = DMX Data+
Pin 4 = Not Used - Thru Connection
Pin 5 = Not Used - Thru Connection
Auxiliary Dry-Contact Inputs
The auxiliary dry-contact inputs are simply a maintained normally-open switch connection between
common and the auxiliary input. The auxiliary inputs are used to activate a selected scene or for
load shed applications. The auxiliary inputs may be interfaced with compatible AV control equipment,
photocells, occupancy sensors and building management systems (BMS). A third auxiliary input
(AUX3) is located internally and is for future use. Refer to menu items AUX TEST, AUX1MODE,
AUX2MODE and LOADSHED on pages 23-24 for further details.
3-Pin XLR Connection Details (Pinout)
Pin 1 = Auxiliary Input 1
Pin 2 = Common
Pin 3 = Auxiliary Input 2
MADD-6 (Multiple Application Dimmer Driver) Controller
The MADD-6 is the central electronic control system (aka brain) for all J-PACK Series dimmer packs.