Jabra PRO 920 User Manual - Manual (Page 24)

25
english
1 Start setup mode
• Put on the headset.
• simultaneously press and hold both headset
volume buttons until the voice prompt says
“setup” and then release the buttons.
start
setup
setUP
2 Setup mode
• the headset buttons are used to cycle through the settings and values.
• the base lights
,or voice prompts are used to indicate which setting and value is currently
selected.
Settings Values
Cycle
through
settings
Cycle
through
values
Base
light
Voice
prompt Setting
Base
light
Voice
prompt
Value
flash x1
Mute reminder
tone
On (default)
Off
flash x2
Ringtone
Ringtone 1
(default)
Ringtone 2
Ringtone 3
Ringtone 4
Ringtone 5
flash x3
audio
protection
Peakstop (default)
Peakstop and
Intellitone
flash x4
Wireless range
normal range
(default)
Low range
Very low range
flash x5
auto sleep
mode
Off (default)
On