Iris507 thermal joystick operation – I.R.I.S. 507 User Manual
Page 3

IRIS507 Thermal Joystick Operation
Control of the IRIS216/316 Thermal Camera is acheived using the IRIS507 controller variant.
The IRIS507 operates in the same way as the IRIS506 but the features specific to the thermal camera are
operated by moving the joystick UP, DOWN, LEFT and RIGHT whilst pressing one of two colour coded ʻfea-
ture keysʼ.
There are two feature keys, one coloured orange and one coloured white, and the specific features they op-
erate are printed onto the joystick bezel in the appropriate colour. Below is a picture of the keyboard bezel
which clearly shows the coloured feature keys and how the bezel is labelled in accordance with which joy-
stick actions are required to operate specific functions.
To Select Colour Schemes:
White Hot: Press ORANGE feature key and move joystick up.
Black Hot: Press ORANGE feature key and move joystick down.
Ironbow: Press ORANGE feature key and move joystick left.
Reverse Ironbow: Press ORANGE feature key and move joystick right.
To Select Contrast Modes:
Normal Operation: Press WHITE feature key and move joystick right
Man Over Board Mode: Press WHITE feature key and move joystick left
Histogram Mode: Press WHITE feature key and move joystick up
Night Mode: Press WHITE feature key and move joystick down.
Digital Zoom:
Twist joystick clockwise to zoom in and anti-clockwise to zoom out. Models supporting 2x and 4x digital
zoom only work as per the instructions below:
2x Digital Zoom: Twist joystick fully clockwise
4x Digital Zoom: Press ORANGE feature key and twist joystick fully clockwise
0x Zoom: Twist joystick fully anti-clockwise