Intelix DL-HDM44 - Manual (Page 20)

DL-HDM44 Installation Guide
20
TCP/IP Setup Commands
Description Command Response
Set static IP address SETIP SETIP
IP Address is
set.
Set subnet mask SETNETMASK SETNETMASK
NetMask Address is
set.
Set gateway SETGATEWAY SETGATEWAY
GateWay Address is
set.
Set matrix to DHCP RSTIP RSTIP
IP configuration is set to DHCP
Mode.
The new IP Address is usable
10 seconds later
Get current IP setup IPCONFIG IPCONFIG
IP Configuration is :
[Static IP/DHCP Mode]
IP:
NETMASK:
GATEWAY:
HTTP PORT: 80
SETIP192.168.0.178 Set static IP Address to 192.168.0.178.
Example:
EDID Commands
Description Command Response
Use built-in EDID EM1 EM1
Use EDID from Output A EM2 EM2