Blaupunkt ALICANTE MP36 - Manual (Page 32)

64
When you have finished making your chang-
es,
press the MENU button twice 9.
Selecting a display illumination during a
colour scan
Press the MENU button 9.
Press the or button : repeat-
edly until "COL SCAN" appears on the
display.
Press the or button : to start the
colour seek.
The device starts changing the display illu-
mination colour.
If you want to adopt the currently set col-
our,
press the MENU button 9 once.
To start the seek tuning again,
press the or button :.
If you found the desired colour,
press the MENU button twice 9.







External audio sources
If no CD changer is connected to the device,
you can connect an external audio source.
Audio sources can, for example, be port-
able CD players, MiniDisc players or MP3
players.
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
The AUX input must be activated in the
menu.
Note:
If
no CD changer is connected to the
device, the AUX menu item cannot be
selected.
Switching the AUX input on/off
Press the MENU button 9.
Press the or button : repeated-
ly until "AUX OFF" or "AUX ON" appears
on the display.
Use the buttons : to select be-
tween the options "AUX ON" and "AUX
OFF".
When you have finished making your chang-
es,
press the MENU button 9.
Note:
If the AUX input is switched on, you can
select it by pressing the SOURCE but-
ton 4.




Display External audio sources