beautypg.com

Setting the sensitivity of station seek tuning, Storing stations, Storing stations automatically (travelstore) – Blaupunkt ALICANTE MP36 User Manual

Page 14: Listening to stored stations, Scanning receivable stations (scan)

background image

46

Setting the sensitivity of station

seek tuning

You can choose whether the radio should

only tune into stations providing good re-

ception or whether it can also tune into

those with a weak reception.

Press the

MENU button 9.

Press the or button : repeatedly

until "SENS" appears on the display.

The display shows the currently set sensitiv-

ity level. "SENS HI3" means that the tuner is

set to the highest sensitivity setting. "SENS

LO1" means it is set to the lowest sensitiv-

ity setting.

Set the desired sensitivity level using

the or button :.

When you have finished making your chang-

es,

press the

MENU button 9.

Note:
You can set different sensitivity levels

for FM and MW or LW (AM).

Storing stations

Storing stations manually

Select the desired memory bank (FM1,

FM2, FMT) or one of the wavebands

(MW or LW).
Tune into the desired station.
Press and hold down one of the station

buttons

1 - 6 for longer than two sec-

onds to assign the station to that but-

ton.



Storing stations automatically

(Travelstore)

You can automatically store the six stations

offering the strongest reception in the re-

gion (FM only). The stations are stored in

the FMT memory bank.

Note:
Any stations that were previously

stored in this memory bank are deleted

in the process.
Press and hold down the

BND•TS but-

ton 6 for longer than two seconds.

The storing procedure begins. "FM TSTORE"

appears on the display. After the process

has completed, the radio will play the sta-

tion that is stored in memory location 1 of

the FMT memory bank.

Listening to stored stations

Select the memory bank or waveband.
Press one of the station buttons

1 - 6

;.

The stored station is played if it can be re-

ceived.

Scanning receivable stations

(SCAN)

You can use the scan function to play all the

receivable stations briefly. You can set the

scanning time in the menu to between 5

and 30 seconds.

Starting SCAN

Press and hold down the

MENU button

9 for longer than two seconds.

Scanning begins.


Radio mode