Blaupunkt ALICANTE MP36 - Manual (Page 19)

51
EN
GLISH
Cancelling MIX
Press the 5 MIX button ; again.
"MIX OFF" appears briefly on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on
the CD.
Press the MENU button 9 for longer
than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Cancelling Scan and continuing listening
to a track
To end the scanning process,
press the MENU button 9.
The currently scanned track will then con-
tinue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button ;.
"RPT TRCK" appears briefly on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.
Cancelling repeat
If you want to cancel the repeat function,
press the 4 RPT button ; again.
"RPT OFF" appears briefly on the display
and the RPT symbol disappears. Normal
playback is then resumed.





Interrupting playback (PAUSE)
Press the 3 button ;.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button
3 ;.
Playback is continued.
Configuring the display
You can select from two display types for
CD mode:
Track number and time
Track number and playing time
To switch the display, press and hold
down the DISPL button 8 for long-
er than two seconds.
Traffic announcements in CD
mode
If you wish to receive traffic announcements
in CD mode,
press the TRA•RDS button 7.
The priority for traffic announcements is ac-
tivated if the display shows the traffic jam
symbol. For further details, please read the
chapter entitled "Traffic information".
Ejecting a CD
Press the button 2.
The control panel opens out towards you.
Press the eject button < next to the
CD tray.
The CD is ejected.
Remove the CD and close the control
panel.


•
•





CD mode