Heidolph RZR 2041 - Manual (Page 16)

16
E
GENERAL INFORMATION
Unpack your item carefully.
Inspect for damage and report such damage or missing parts to your supplier right away.
Read your Instruction Manual carefully. Take time to save time when working with your
product. Make sure that every user has read and understood the Instruction Manual.
Please store the Instruction Manual in a place easily accessible to every user.
IF ALL ELSE FAILS, READ THESE INSTRUCTIONS !
A so-called EURO-plug (DIN 49441 CEE 7/VII 10/ 16 A 250 V) is standard on all of the
products.
For the Continental US they feature a US-standard plug (NEMA Pub.No.WDI.1961 ASA
C 73.1 . 1961 page 8 15A 125V).
For using the item in a country with deviating outlet / plug systems, we recommend to
use approved adapters or to have an electrician replace the standard plug with one suit-
ing your needs.
As shipped, the item features a protective ground wire. When replacing the original plug,
make sure to reconnect this protective ground wire in the new plug !
SAFETY INFORMATION
Please comply with all safety and accident-prevention regulations as in force for
laboratory work !
Use extra care when working with flammable substances; refer to safety data
sheets.
When connecting your item with your local power supply, please make sure your
item is designed for your local voltage; go by the data plate on the item.
Turn your power switch OFF whenever the item is not used, or before disconnect-
ing the plug.
Repair work is limited to technicians approved by Heidolph Instruments.
Use extra care when working in the vicinity of flammable and explosive sub-
stances. Motors are of non-sparking type, the item itself however is not explosion-
proof.
Please connect your stirrer with a protective-ground outlet only.
Please strictly comply with current safety regulations for machines exposing ro-
tating shafts.
Your item needs a solid stand.