GeoDesy Giga Pico Next TP - Manual (Page 32)

GeoDesy Kft. Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
E-mail: [email protected]
http://www.geodesy-fso.com
32
7.2 Network Interface software update
1. Connect the RJ11 and RS232 cable (update cabel)
between the laser head and the PC.
2. Enter into the management of the laser head and into the device info.
4.Cl
ick on the „Update” button.
5.Click on OK button.
6. Start the Total Commander program and start PIC32.exe program.
7. Choose COM1 port.
8.Click ont the Connect button.
9.Click on Erase button.