GeoDesy Giga Pico Next TP - Manual (Page 24)

GeoDesy Kft. Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
E-mail: [email protected]
http://www.geodesy-fso.com
24
Device setup
The device setup screen leads you to the main monitoring options. Here the alarms
can be set and main information about the Laser head.
Device name: uniqe identifier of
the device
Managed head: Type of the
laserhead
Temperature alert level: when the temperature reach this value, the alarm will be
triggered.
Auto recovery time: It determines the time before the heads start the recovery
process in the case of link disconnection
.
Motherboard Serial number: Mainboard serial number inside the head (Not the same
as the Head Serial Number)
Motherboard Firmware version: This is the version number of the Firmware For the
update procedure please referr to the Firmware update section.
Head Serial number: Serial number of the unit. Should be the same number as the
one on the back of the unit. If the number is missing or not match up with the one on
the back, during activation this is the number you will have to let the support know.