Gast 5D Series User Manual
Page 3
MAINTENANCE conti.
-Place the valve in the valve plate pocket so that
the holes in the valve fit over the correct pins in
the valve plate.
-Assemble the head by fitting the correct holes in
the head onto the pins in the valve plate.
-Place the entire head, valve, and valve plate
assembly on top of the bracket, by aligning the
four holes and orienting the ports in your desired
position.
-Torque the head screws to 26 to 30 in- oz. into
the body.
ƽCAUTION Do not over-tighten head screw(s).
To do so can risk stripping the
plastic threads.
PARTS ORDERING INFORMATION
DC WIRING
RED/WHITE (+)
BLACK
+
M
♦
Denotes parts included in the service kit.
When corresponding or ordering parts, please give complete model and serial numbers.
*Material: Fluorocarbon, or EPDM.
3
Ref.
No.
Description
Part
Qty
5D
1
Head screws
4
SCR1019
2
Head
1
HDC1006
♦
3
*Valve
1
VLV1006
4
Valve Plate
1
VPL1005
5
Retainer
1
RPL1005
♦
6
*Diaphragm
1
DPH1007
7
Body
1
BKT1008
Service Kit
(w/ Flouroc arbon
Diaphragm Mat’l)
1
K789
Service Kit
( w/ EPDM
Diaphragm mat’l)
1
K788