Garland HO1500 INDUCTION TEMPERATURE CONTROLLED TABLETOP HOLD-LINE - Manual (Page 12)

Installation RTCSmp Tabletop Temperature Controlled Hold-Line
12 Part # 4532289 Rev 2 (1/17/14)
To setup the unit for operation:
1. The ON/OFF switch is on the bottom of the unit, next to the air filter.
Ensure the ON/OFF switch is at the OFF-position.
2. Remove all objects from the glass top and check that the glass-top is neither cracked nor broken.
CAUTION
Do not continue if the glass-top is cracked or broken.
Contact an authorized service agency for assistance.
3. Connect the unit to the power supply.
4. Perform the Function Test. See chapter 5 Function Test.