Garland XG36CE BE/FR MASTER SERIES GAS XPRESS GRILL - Manual (Page 24)

Part # 4517129 Rev.1 (03/10/10) Page 24
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press three, (3) times. “PROGRAMMING MODE PROD
NAME LIB” is displayed.
5. Press . “PROD NAME LIB” is displayed.
6. Press . “PROD NAME LIB” will be displayed on the top
line, with a flashing cursor on the bottom line.
7. Use and to change the character, (A-Z, 1-9,
, and hyphen are available). Use and to
move the cursor position.
8. Press to save the new product name. “SAVE LIBRARY
ADD” is displayed.
9. Press to save. “PROGRAMMING MODE PROD NAME
LIB” is displayed.
10. Press to exit.
To Modify a Product Name in Library:
1. Press and hold for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press three, (3) times. “PROGRAMMING MODE PROD
NAME LIB” is displayed.
5. Press . “PROD NAME LIB” is displayed.
6. Use and to select Product Name to be modified.
7. Press . The first character in the Product Name will
start flashing.
8. Use and to change the character, (A-Z, 1-9,
, and hyphen are available). Use and to
move the cursor position.
9. Press . “SAVE LIBRARY ADD” is displayed.
10. Press . “SAVE LIBRARY MODIFY” is displayed.
11. Press to save. “PROGRAMMING MODE PROD NAME
LIB” is displayed.
12. Press to exit.
PROGRAMMING
continued
Service Mode
To Change SCK Address:
1. Press and hold for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press three, (3) times. “PROGRAMMING MODE SERVICE
MODE” is displayed.
5. Press one, (1), time. “Address XX” is displayed.
6. Use and to change to the desired SCK Address.
7. Press to save the changes.
8. Press to return to “PROGRAMMING MODE SERVICE
MODE”
9. Press again to exit.
To Perform Limit Switch Test:
1. Press and hold for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press three, (3) times. “PROGRAMMING MODE SERVICE
MODE” is displayed.
5. Press two, (2), times. “PLATEN” (along with the position
of each switch), is displayed.
6. Use and to move the platen up and down. Check
for correct switch operation:
Correct Switch Operation:
Platen Up - U (Closed) L (Open)
Platen Down - U (Open) L (Closed)
7. Press to return to “PROGRAMMING MODE SERVICE
MODE”.
8. Press again to exit.