Garland XG36CE BE/FR MASTER SERIES GAS XPRESS GRILL - Manual (Page 13)

Part # 4517129 Rev.1 (03/10/10) Page 13
NORMAL OPERATION
continued
To Cook in Two-Sided Mode:
1. To start a cook cycle select a product recipe by using the
product keys (1 through 9) or by using the UP/DOWN
keys or to select a product recipe.
The display alternately blinks the recipe and the word
SELECTED 2 times then the recipe displays continuously.
2. The controller regulates the platen and grill temperatures
to the set temperatures of the product selected and
reads “TOO COOL” or “TOO HOT” with “MENU ITEM”, until
the grill attains the set temperature range for the item.
NOTE: If the display reads either “TOO COOL” or “TOO HOT”
the upper platen will not lower and initiate a cooking
sequence.
3 After loading the product onto the grill, press the green
CANCEL/RAISE PLATEN BUTTON and BLACK button
simultaneously. A cook cycle starts and the upper platen
lowers if the product selected is clamshell recipe.
4 To cancel a cook cycle at anytime press the green
CANCEL/RAISE PLATEN BUTTON and the upper platen
will rise if the product recipe selected is clamshell recipe.
5. During a cook cycle, the display shows the product recipe
name in the first line and the remaining cook time count
down in the second line.
6 When the cook timer reaches one, (1), second remaining
a pre-time-out alarm sounds alerting the operator.
7 When the cooking time has been completed the platen
raises automatically. On the controller the “PRODUCT
NAME” and the word “REMOVE” will be displayed and an
audible alert will sound.
8. Pressing the green CANCEL/RAISE PLATEN BUTTON stops
the audible alert and the unit will revert back to IDLE
mode.
To Cook in Flat Grill Mode:
1. To start a cook cycle select a product recipe by using the
product keys (1 through 9) or by using the UP/DOWN
keys or to select a product recipe.
The display alternately blinks the recipe and the word
SELECTED 2 times then the recipe will be displayed
continuously.
2. The controller regulates the grill temperature to the set
temperature of the product selected and reads “TOO
COOL” or “TOO HOT” with “MENU ITEM”, until the grill
attains the set temperature range for the item.
NOTE: If the display reads either “TOO COOL” or “TOO HOT” it
will not initiate a cooking sequence.
3 After loading the product onto the grill, press the green
CANCEL/RAISE PLATEN BUTTON and BLACK button
simultaneously. That will start a cook cycle if the product
selected is clamshell recipe.
4 To cancel a cook cycle at anytime the press the green
CANCEL/RAISE PLATEN BUTTON .
5. During a cook cycle, the display shows the product recipe
name in the first line and the remaining cook time count
down in the second line.
6. The display shows the “SEAR” or “FLIP” alarm message
with flashing in the second line if the current cooking
product is flat recipe and the sear time or flip time is not
zero.
7. A cook alarm sounds with a repeating beep pattern.
Pressing the black RAISE button acknowledges the “SEAR”
or “FLIP” alarm message if the alarm field in system setup
is set to MANUAL.
8. The “SEAR” or “FLIP” alarm message stops after 5 seconds
if the alarm field in system setup is set to AUTO.
9. When a cook is complete, the display shows the product
recipe name in the first line and a flashing “REMOVE”
message in the second line. A repeating beeping alarm
also sounds.
10. Pressing the black RAISE button cancels the cook done
alarm.
11. The unit reverts back to IDLE mode.
Enter Standby Mode:
Stand by mode is used during slow periods to conserve
energy with out a complete shut down of the unit. When
cooking temperatures are again required, pre-heat cook
temperature/time is reduced. Stand by mode temperatures
can be adjusted, see the PROGRAMING section.
1. Select Standby Mode by pressing or until
“STANDBY” is displayed.
2. Press the GREEN (‘CANCEL/RAISE’) and the BLACK buttons
at the same time. As soon as the upper platen moves
down, the display will read “STANDBY MODE.” (Note:
The first time Standby Mode is entered, the display will
prompt the operator to press ENTER after pressing the
GREEN and BLACK buttons.)
Exit Standby Mode:
1. Press the GREEN (‘CANCEL/RAISE’) button. The upper
platen will raise and the display will read “CANCEL” with
an audible alarm.