EUCHNER ActiveX Module Ethernet TCP/IP - Manual (Page 13)

Manual EKS ActiveX
®
Module Ethernet TCP/IP
3.5.7 Opening
 Description State of the method Open
 Syntax bool = object.Opening;
 Comments If the property Opening returns the value True, the method Open is currently active. As
long as this method is active it is not possible to call any other methods
 Data type bool
 Default value false
3.5.8 Reading
 Description State of the method Read
 Syntax bool = object.Reading;
 Comments If the property Reading returns the value True, the method Read is currently active. The
data on the Electronic-Key are not yet available in the property Data. As long as this
method is active it is not possible to call any other methods.
 Data type bool
 Default value false
3.5.9 Writing
 Description State of the method Write
 Syntax bool = object.Writing;
 Comments If the property Writing returns the value True, the method Write is currently active. The
write request is still active and the data have not yet been completely written to the
Electronic-Key. As long as this method is active it is not possible to call any other
methods.
 Data type bool
 Default value false
3.5.10 KeyState
 Description Returns the status of the last event.
 Syntax bool = object.KeyState;
 Comments Possible parameters are:
 EKS_KEY_IN = 1
 EKS_KEY_OUT = 2
 EKS_KEY_OTHER = 3
 Data type KeyStateConstants (Enumeration)
 Default value EKS_KEY_OUT
3.5.11 Version
 Description Returns the actual version of the EKS Ethernet ActiveX ® module
 Syntax String Value = object.Version;
 Data type String
102030-02-10/12 Subject to technical modifications Page 13 / 20