Englert S5 Versa Bracket - Manual (Page 2)

Please note: All measurements are rounded to
the second decimal place.
Distributed by S-5! ® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. For published data regarding holding
strength, bolt torque, patents and trademarks visit the S-5! website at www.S-5.com.
Copyright 2011, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks and copyrights.
VersaBracket ™ can be used for almost any attachment need,
including S-5! ® ColorGard ® , on all types of exposed-fastened
metal roofing. No messy sealants to apply. The factory-applied
butyl sealant waterproofs and makes installation a snap!
VersaBracket-47 ™
VersaBracket-67 ™
3 holes are provided for versatility. Some
installations require only 2 fasteners. See
the load table on the S-5! website and the
installation instructions for more details.
Due to varied applications, mounting hardware
is not furnished with part.
VB-67
VB-47
ColorGard S-5-PV Kit (DirectAttached or Rail)
Example Uses
Example Profile
1.35"
(34.00 mm)
2.65"
(67.00 mm)
1.50"
(38.00 mm)
2.88"
(73.00 mm)
0.90"
(23.00 mm)
0.54"
(13.00 mm)
0.28"
(7.00 mm)
1.35"
(34.00 mm)
1.86"
(47.00 mm)
1.02"
(26.00 mm)
2.88"
(73.00 mm)
0.90"
(23.00 mm)
0.54"
(13.00 mm)
0.26"
(7.00 mm)
1.00"
(25.00 mm)
0.38"
(9.00 mm)
To accommodate various rib heights, VersaBracket ™
comes in two heights—the 2.65" VersaBracket-67 ™
and the 1.86" VersaBracket-47 ™ . The VersaBracket-67
mounting face has no holes or slots, thus, ancillary
items are typically secured using self-tapping screws.
The VersaBracket-47 comes with a 1" slot on top as
the standard part. Other hole and slot configurations
available with minimum purchase requirements
(contact your distributor for available configurations).
Each VersaBracket comes with factory-applied butyl
sealant in the base. A structural aluminum attachment
bracket, VersaBracket is compatible with most common
metal roofing materials. For design assistance, ask your
distributor, or use our web-based calculator at
www.S-5.com for job-specific system engineering and
design of your next snow retention project. Also please
visit our website for more information including CAD
details, metallurgical compatibilities and specifications.
The VersaBracket has been tested for load-to-failure
results on wood decking, metal and wood purlins. The
independent lab test data found at www.S-5.com can
be used for load-critical designs and applications. S-5!
holding strength is unmatched in the industry.