ElmoMC SimplIQ Digital Servo Drives-Whi-Solo Installation Guide - Manual (Page 3)

Revision History
Version Date Details
1.0 June 2008 Initial Release
1.1 November
2008 Changed: Front matter, P/N explanations, sticker & schematics in
Section 4.2, Figure 14, Figure 15, Figure 16, Section 3.7 and
Section 3.8. Added information for auxiliary input features in
Chapters 2 and 3 and in Section 4.7.4.
MTCR 00-100-33: Weight of product changed to 68.4 grams in
Section 4.3
1.2 February
2009 MTCR 01-009-39: Section 3.7.1: Advanced not mandatory
therefore in Mode 1 catalog number, “A” was removed.
1.3 March
2009 MTCR 01-009-41: Clarifications regarding models with connectors
and wires on the Notice page (above) and on Pages 17, 18. 4-Pin
option added to table on Page 18.
1.4 March
2010 MTCR 04-009-48: Section 3.5: Pin J1/2 renamed to PR.
1.5 Sept.
2012
Formatted according to the new template
“Metronome” was replaced by the “Composer” software.
1.501 Jan. 2013 Updated the auxiliary power supply value.
Updated the 200 V power ratings table.
Section 4.3: Physical Specifications, was added.
Added a caution and recommendation on the type of cleaning
solution to use for the Elmo unit.
1.502 Dec. 2013 General document update
1.503 July 2014 General updates