ElmoMC SimplIQ Digital Servo Drives-Whi-Trio Cable Kit - Manual (Page 8)

Solo Whistle Cable Kit
MAN-CBLKIT-SOLWHI (Ver 1.0)
4-1
4. Auxiliary Feedback Cable (CBL-MLXAUX)
The auxiliary feedback cable is a 24-AWG twisted-pair shielded cable. It is connected
using an 8-pin Molex 2 mm pitch plug.
Four op
Installation Guide
ƒ
Main encode
ƒ Differential e
ƒ Sing
ƒ Puls
The Auxi X) is open on the motor side so that it can be
connecte
The general pino as follows:
Pin
No. Color Shielded Wire Description
tions — described in the Auxiliary Feedback section(s) in the Solo Whistle
— are available for auxiliary feedback:
r buffered outputs
ncoder inputs
le-ended encoder input
e-and-direction input
liary Feedback cable (CBL-MLXAU
d to customer-specific connectors.
ut of the auxiliary feedback cable is
Twisted &
1 Brown
2 White
ir see Installation Guide Pa
3 Green
4 Yellow
air all P see Inst ation Guide
5 Gray
6 Pink
Pair all see Inst ation Guide
7 Blue
8 Red
Pair see Installation Guide
The specific fun in is fully outlined in the Solo Whistle
Installation Guides.
ctionality of each p
Figure 2: Auxiliary Feedback Cable (Part No. CBL-MLXAUX)