ElmoMC SimplIQ Digital Servo Drives-Whi-Trio Cable Kit - Manual (Page 4)

Solo Whistle Cable Kit
MAN-CBLKIT-SOLWHI (Ver 1.0)
1-1
1. Introduction
This document provides the wiring details for the cables used to connect the Elmo
Solo-Wh
end-user application. The servo drive-side
pinouts drive’s installation guide.
The cables com
1.1 Solo
The table belo histle drive and specifies
the cable
Pins Type Part Number Port
istle digital servo drive with the
are provided in Chapter 3 of the
e in one length: 2 meters (6 ½ feet).
Whistle Connectors
w presents the connector panel of the Solo W
connectors.
Connector Manufacturer and
9 3.5 m h Wires m Pitc J1
12 2 mm ch Molex J2 Pit 35507-1200
8 2 mm h Molex J3 Pitc 35507-0800
12 2 mm ch Molex J4 Pit 35507-1200
3 2 mm Pi ch Molex 35507-0300 J5 t
3 2 mm Pi ch Molex 35507-0300 J6 t
3 2 mm ch Molex J7 Pit 35507-0300
8 3.81mm itch es J8 P /16-18 AWG Wires Wir
Connector Locations
Table 1-1: Connectors on the Solo Whistle Drive