ElmoMC Gold Line Digital Servo Drives-Gold Duo - Manual (Page 20)

Gold Duo Installation Guide
MAN-G-DUOIG-E (Ver. 1.500)
||Basic Recommendations| www.elmomc.com
20
Table of Contents
6.1.3. Feedback Cable Port C Connector
1. At the controller side connections, follow the controller manufacturer’s recommendations
concerning the shield.
2. The connection of the Drain wire to the Port C is not mandatory.
Figure 6: Feedback Port C Cable Assemblies
6.1.4. IO Cable Connector
It is recommended to use shielded cable, but is not mandatory.
Figure 7: Feedback IO Cable Assemblies