Elkhart Brass SS-475GAAT - Manual (Page 7)

98477000 Rev. A
IV. M
AINTENANCE
The following maintenance procedures should be followed in order to reduce to possibility of
field difficulty or failure.
A. Inspections
Weekly visual inspections and monthly operational checks will promote proper nozzle function.
These inspections should be done daily in busy companies. All nozzles should be flow tested
before entering any hazardous environment to ensure equipment is operating properly.
B. Maintenance After Use
The nozzle should be flushed thoroughly after every use. This can be done by flowing a clean
water source through the nozzle. The internal passageway of the nozzle should also be
visually inspected for possible damage caused by foreign objects carried by the water through
the nozzle.
C. Storage
To prevent possible freeze damage during response, be sure nozzle is thoroughly drained
prior to placing back on apparatus.
Important:
If there is a question regarding any necessary repair or damage issue, contact Elkhart Brass for
assistance.
Phone #: 800-346-0250
Email: [email protected]