B&B Electronics PCMCIA 232PCC2 User Manual
Page 16

Documentation Number 232PCC23799 Manual
15
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353-91-792444 – Fax +353-91-792445
Chapter 4: Windows 95/98 Installation
To allow easy configuration of the 232PCC2, a Windows
95/98 “INF”configuration file has been written for the hardware. This
configuration file supports the 232PCC2 in both addressing modes:
block mode and COM mode.
Installing a 232PCC2 Under Windows 95/98.
1. Insert the 232PCC2 into any available PC Card socket.
2. The first time a new PC Card type is installed, either the
New Hardware Found window or the Update Device
Driver Wizard window is displayed. After the initial
installation, Windows 95/98 will automatically detect and
configure the card. If the neither window is displayed, skip
to the section "232PCC2 Resource Settings".
3. If your version of Windows displays the New Hardware
Found window select the
Driver from Disk
option button
and click
OK
to continue. An Install from Disk dialog box
should open. Insert the 232PCC2 disk, select the correct
drive letter (generally A:), and click the
OK
button. Windows
95/98 automatically browses the root directory for an INF file
that defines configurations for the new hardware, as well as
the required files.
4. If your version of Windows displays the Update Device
Driver Wizard window, insert the 232PCC2 disk into the A:
or B: drive and click Next. Windows 95/98 automatically
browses the root directory of A: and B: for an INF file that
defines configurations for the new hardware, as well as the
required files. Windows 95/98 will report that is has found
the driver for the device, click Finish to complete the
installation.
During the installation process, it may be required to supply
the computer with the Windows 95/98 CD or installation
diskettes. The 232PCC2's serial devices will require the file
"SERIALUI.DLL". Insert the CD or diskette and click “OK".