Det-Tronics X7050 xWatch Industrial Video Surveillance Camera - Manual (Page 14)

3.1 95-8600 12
appenDiX a
FM / CsA APPrOVAL
FM CErTIFICATIOn
CErTIFICATE OF COMPLIAnCE -
Hazardous (Classified) Location Electrical Equipment
Explosion-proof for Class I, Division 1, Groups B, C, and D; and dust ignition-proof for Class II/III, Division 1,
Group E, F, and G T5 Ta = 75°C hazardous (classified) locations, indoors and outdoors (Type 4X).
applicable stanDarDs
Electrical and Electronic Test, Measuring and Process Control Equipment, Class 3810, 2005.
Electrical Equipment for Use in Hazardous (Classified) Locations, General Requirements, 3600, 1998.
Explosionproof Electrical Equipment, General Requirements, 3615, 2006.
Enclosures for Electrical Equipment, ANSI/NEMA 250, 2003.
CsA CErTIFICATIOn
CLAss 4818 01 -
SIGNAL APPLIANCES - Systems - For Hazardous Locations
Class I, Division 1, Groups B, C, and D (T5); Class II/III, Division 1, Groups E, F, and G (T5); Enclosure NEMA/Type 4X;
xWatch Model X7050 Video Camera, NTSC or PAL system video output, rated 18-30 Vdc, 2.8 Watts maximum.
applicable reQuirements
CSA Std C22.2 No. 25-1996
– Enclosures for use in Class II Groups E, F & G Hazardous Locations.
CSA Std C22.2 No. 30-M1986 – Explosion-Proof Enclosures for use in Class I Hazardous Locations.
CAN/CSA C22.2 No. 94-M91 – Special Purpose Enclosures.
CSA Std C22.2 No. 142-M1987 – Process Control Equipment.