Despatch RFD1-42-2E with Protocol Plus - Manual (Page 19)

11
Loading the Oven
Despatch Industries cannot be responsible for either the process or process
temperature used, or for the quality of the product being processed. It is the
responsibility of the purchaser and operator to see that the product undergoing
processing in a Despatch oven is adequately protected from damage.
Carefully following the instructions in this manual will help the purchaser and operator in
fulfilling that responsibility.
When loading the oven avoid spills of anything onto the heater elements or onto the
floor of the oven. Do not place the load on the oven floor plate. This may cause the
load to heat unevenly and the weight may cause shorting out of the heater elements.
Use the shelves provided.
The two shelves are designed to be pulled out about half way without tipping. The
support capacity of the shelves is listed in the Capacities Table in the Specifications
section in this manual. Do not overload the shelves.
Distribute the workload evenly so that airflow is not
restricted. Do not overfill your oven. The workload
should not take up more than two-thirds of any
dimension of the inside cavity.
WARNING:
This equipment is designed for
a specific amount of solvent.
Exceeding this amount could
result in explosion.