Operating procedure, Start oven, Working with protocol 3 operating modes – Despatch RAD1-42 -2E with Protocol 3 User Manual

Page 22

PERATION

RAD1-42-2E Oven Owner

’s Manual

Version 1

All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.

5.3. Operating Procedure

5.3.1.

Start Oven

For fastest oven heat-up time, close the fresh-air vent. After reaching the desired temperature,
adjust the vent as needed.



If your oven is equipped with a Disconnect Switch, turn it to
ON before starting the fan.

1. Start the fan.

a. Open oven door.
b. Set

POWER

to ON. You will hear the sound of the recirculating fan starting.

c. Shut oven door.
d. Check that the control display turns ON.

2. Operate the temperature control as desired.

5.3.2.

Working with Protocol 3 Operating Modes

Refer to the Protocol 3 Controller Owner’s Manual for specific information on working with the
controller.