Way active, Line array module, Dva t8 – dB TECHNOLOGIES DVA Series User Manual
Page 8

3-Way Active
Line Array Module
11
3-Way Active
Line Array Module
Top Performance Paired with Total Control
The	DVA	T8	is	a	fully	active,	three-way	speaker	system	equipped	with	
the	same	innovative	technologies	that	feature	so	prominently	in	the	
DVA	T12.
Its	 power	 supply,	 DSP,	 power	 amps,	 woofers	 and	 drivers	 were	 all	
developed	and	painstakingly	tuned	specifically	for	the	DVA	T8	system	
by	the	dBTechnologies	team	of	engineers.				
Precise directivity
The	 DVA	 T8	 sports	 constant	 directivity	 horns,	 HF	 drivers,	 and	
midrange	 woofers	 optimized	 to	 deliver	 a	 uniform	 100°-by-15°	
coverage	pattern.	It	makes	the	most	of	two	acoustical	effects	to	help	
distribute	SPL	evenly.
One	 is	 the	 vector	 addition	 of	 individual	 horns’	 output;	 the	 other	
is	 cylindrical	 wave	 formation.	 These	 two	 effects	 come	 together	 to	
create	a	uniform	coverage	pattern	that	is	easily	adapted	to	different	
venues	 by	 varying	 the	 length	 of	 the	 array	 and	 adjusting	 the	 splay	
between	individual	components.
Uniform coverage pattern
Evenly distributed SPL
	
	
Technical Data
Speaker Type: 3-Way Active Line Array Module
Acoustical data
	 Frequency	Response	[+/-	3dB]:	66	-	18.000	Hz
	 Max	SPL:	One	Unit:	132	dB
	 HF:	2x1	“
	 Voice	Coil	HF:	1.4	“
	 Directivity:	100x15°	Single	unit
	 MF:	1x	6.5	“
	 Voice	Coil	MF:	2	“
	 LF:	8	“
	 Voice	Coil	LF:	2.5	“
Amplifier
	 Amp	Technology:	Digipro®	G2
	 Amp	Class:	Class	D
	 HF	Amp:	175	W	RMS
	 MF	Amp:	175	W	RMS
	 LF	Amp:	350	W	RMS
	 Cooling:	Convection
Processor
	 Controller:	DSP	56	bit	with	double	precision	filters
	 AD/DA	Converter:	24	bit/96	kHz
	 System	Presets:	9,	(8xHF	and	Low-mid	correction)
	 Limiter:	Dual	Active	Limiter	Multiband	RMS,
																		Peak,	Thermal
	 Crossover	Frequency	MF-HF:	1900	Hz
	 Slope	MF-HF:	24	dB/Octave
	 Crossover	Frequency	LF-MF:	400	Hz
	 Slope	LF-MF:	24	dB/Octave
Input
	 Signal	Input:	1x	XLR	fem,	Bal.
	 Signal	Output:	1x	XLR	male,	Bal.
	 Network:	RDnet	remote	control	RJ45	connector
																					IN/OUT
	 Power	Socket:	1x	Powercon	In	1x	Powercon	Out
	 Voltage	Range:	90	-	240	V
Mechanics
	 Housing:	Polypropylen	PP	Metal	reinforced
	 Housing	Design:	Trapezoidal	15°
	 Rain	cover:	Included
	 Rigging	Points:	Integrated	rigging	hardware
	 Width:	580	mm	(23.2	in)
	 Height:	240	mm	(9.6	in)
	 Depth:	327	mm	(13.08	in)
	 Weight:	14.2	kg	(31.3	lbs)
DVA T8
