DATOptic T5_R5-eSUF - Manual (Page 20)

T5_R5-eSUF RAID Manager User Guide Rev. 0.90 20 09/03/19
Page
14
2.1.3 Basic RAID Configuration
HW RAID Manager provides users to do the basic RAID configuration to the connected disks in this
page. According to the number and capacity of the connected disks, HW RAID Manager will provide
the available RAID type for users to select. When the user select his/her desired RAID type, HW RAID
Manager will automatically select the available disks to build the RAID and calculate the RAID capacity.
It will show the selected disks charts drawn in the cross pattern on the right part.
For example, if the user selects RAID 10, HW RAID Manager will select four available disks to build
RAID 10 starting from the lower Disk number. At the mean while, it will calculate the smallest disk size
to build RAID and calculate the total capacity of the RAID.
Figure 12 – Create RAID 10
If the user wants to set the password for the new RAID, he/she could check the password group box and
enter the password.