Dascom TallyCom III Getting started with PrintGuide - Manual (Page 14)

Getting Started with PrintGuide
™
14
2.3 Example of configuring a logical printer
in the TallyCom III PrintServer
1. Start the PrintGuide program (See “ Start PrintGuide ”).
2. Locate a PrintServer on the list of Detected Devices ( Figure 9 )
and double-click it. The PrintServer is identified by its Address and
Name.
Figure 9
3. Type a Print Server Name, Contact Person, and PrintServer
Location ( Figure 10 ). This information is optional, but it will help
you identify the PrintServer in the future.
Note: The information in the remaining dialogs depend on the PrintServer
and the logical printer selected. Consult the online help for
additional information.