Dascom T5040 Quick Start Guide - Manual (Page 23)

Quick start guide Service and Maintenance
19
EN
GLIS
H
` Printing the Status Page The printer has a function that allows you to printout the current parameter
settings.
Power the printer off.
Press and hold the USER2 key while switching on the
printer.
The LCD displays Print StatusPage Load Paper. Release
the USER2 key.
Insert the paper in the printer. The LCD displays Print
StatusPage Printing... and the printout of the status page is
carried out.
The paper will be ejected once printing is complete.
While printing, you can use the STOP key to cancel the
printing. If STOP key is pressed, printing stops and paper
will be ejected.
When the test printout is aborted or completed, LCD will dis-
play Print StatusPage Completed.
The Print setting mode will be ended automatically and a
Power ON reset will be performed.
SETUP
PAPER
STOP
/EJECT
USER1 USER2
SETUP
PAPER
Print StatusPage
Load Paper
STOP
/EJECT
USER1 USER2
SETUP
PAPER
Print StatusPage
Printing...
STOP
/EJECT
USER1 USER2
SETUP
PAPER
Print StatusPage
Completed
STOP
/EJECT
USER1 USER2
T3010-Quick Start-en.fm Seite 19 Dienstag, 5. Dezember 2006 10:54 10