Dascom T5040 Programmers Application Manual - Manual (Page 4)

4
Country-specific character sets
0, 6 ISO 8859-2 East Europa
1, 7 ISO 8859-5 Cyrillic
2, 8 ISO 8859-7 Greece
3, 9 ISO 8859-8 Hebrew
4, 10 ISO 8859-9 Turkey (CodePage 920)
5, 11 ISO 8859-15 Euro (CodePage 923)
12–255 (no change)
Ejecting document/loading position of next document
Data Structure ASCII ESC [ $ p
hex. 1B 5B 24 70
dec. 27 91 36 112
Function This command ejects a loaded document; a parameter specifies the position of
the next loaded document.
= 0: Paper is ejected
= 1: Paper is loaded
Characters stored in the printer will be printed by this command.
Parameter setting for MSR-H
Data Structure ASCII ESC [ n1...n5 ! r
hex. 1B 5B n1...n5 21 72
dec. 27 91 n1...n5 33 114
Function This command sets the following parameters for MSR-H (valid only if MSR-H is
installed):
n1 = number of write repetitions (0 to 2)
n2 = number of read repetitions (0 to 2)
n3 = identifier of the write/read format (number of the recording format)
n4 = vertical distance from the form edge (0 to 9999 in the measuring unit
1/180 inch, thus n4/180 inch)
n5 = leading edge for the vertical distance (0 = top, 1 = bottom).