Dascom T5040 Programmers Application Manual - Manual (Page 3)

3
Vertical positioning from the bottom (absolute)
Data Structure ASCII ESC [ " p
hex. 1B 5B 22 70
dec. 27 91 34 112
Function This command feeds a document to a specified vertical position in relation to the lower
(bottom) edge of a paper.
= Positioning in vertical direction by n/180 inch (n=1 to 9999)
The permitted upper limit of the parameter value of is specified by the page length
defined in the setup menu.
Characters stored in the printer will be printed by this command.
Selecting fonts/character sets
Data Structure ASCII ESC [ # q
hex. 1B 5B 23 71
dec. 27 91 35 113
Function Using this command by means of a type font or character set number n, special
character sets (fonts) can be selected which do not belong to the standard character
sets of the Epson protocol.
= type font or character set or font number (0 to 9999)
Font Font number
OCR-A 900 (DIN code page)
OCR-B 901
Roman 600
Sans-Serif 601
Draft 602
600, 601 and 602 are selected by this command, the meaning of ESC R will
change to the values listed below. But, after selecting Character Table by ESC ( t, the
meaning of ESC R will return to the original.