Signal, Child lock – Bosch Lavadora Next Premium User Manual
Page 26
26
Signal
The acoustic signal indicates the
start or end of the program,
operating errors or malfunctions.
You can specify the volume of the
acoustic signal.
Activating, specifying the
signal volume and
deactivating the signal
q Turn the program selector to
the desired program.
q Load the laundry and close the
door.
The Start/Pause indicator light
flashes (red).
Example:
q Press the Menu button until
Signal: off" is displayed.
The
Z
" symbol flashes.
The Start/Pause indicator light
flashes (red).
i
If no buttons are pushed within
10 seconds the display will
revert back to normal Ready".
Changed settings will be
retained.
q Press the Select button until
Signal: continuous" is
displayed.
While holding down the Select
button the volume of the
acoustic signal will increase.
When the signal has reached
the required volume, release
the Select button.
q Hold down the Select button
after 10 seconds the display
indicates Signal: max".
q To deactivate the signal, if the
display indicates Signal: max",
hold down the Select button,
after 10 seconds the display
indicates Signal: off".
i
The selected setting is retained
after the washing cycle.
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
q Press the Start/Pause button.
The program starts.
The indicator light is lit.
i
The individual program steps
are indicated in the display field.
Child lock
You can secure your washing
machine to prevent selected
functions from being changed
inadvertently .
If the child lock has been selected:
- No changes can be made while
the program is running.
- The door remains locked at the
end of the program.
Activating the child lock
q Turn the program selector to
switch on the appliance.
q Press the Menu button until
Child lock: off" is displayed.
The
G
" symbol flashes.
q Press the Select button until
Child lock: on" is displayed.
When the menu is left, the
G
"
symbol is permanently
displayed.
i
You can set child lock on/off
before starting a program or in
Pause" mode only.
Starting a program with child
lock: on"
q Turn the program selector to
the desired program.
q Load the laundry and close the
door.
The Start/Pause indicator light
flashes (red).