Condux Micro Duct - Manual (Page 4)

4
General Information
The Micro Duct Installation Kit is designed to be used with the Condux LW
Cable Blower.
The Micro Duct Kit allows multiple Micro Ducts of the same size to be
installed simultaneously into one larger duct, by using a combination of
pushing from the tracks/belts and air to help carry the ducts.
The Micro Ducts are pressurized to help reduce crushing during installation.
gENERAL mACHINE uSE
a. Only qualified operators should use the machine. The operator should
only be the person who received qualified training from the product
owning company or trained by the manufacturer.
b. Machine must only be used for the work it was designed for.
c. Machine is not to be used with unauthorized personnel on the job site.
d. Should there be any doubt concerning use, functioning, maintenance
or anything else, please contact the factory or factory representative.
OPERATOR QuALIFICATIONS
a. Operator must know the required safety directives to run the machine
that are pertinent to the country where it is being used.
b. Operator in charge of the machine and installation project must be
appropriately dressed, avoiding large clothes, hanging jewelry or
whatever might become entangled in the moving parts.
c. Operator must also wear the necessary protective equipment such as
gloves, boots, helmet, etc.
d. Operator must carefully follow all advisements contained in the
instruction manual or on the machine.
e. Operator must have work area kept clean of obstacles that might
inhibit a safe working area.
mAINTENANCE QuALIFICATION
a. All of the machine maintenance must be carried out with the machine
on a level surface and not attached to any form of power source:
pneumatic, nor hydraulic.
b. Authorized and trained personnel must do all maintenance operations.
Trained personnel are defined as people who have received qualified
training from the using company or from the manufacturer.
1.