Blaupunkt MIAMI CD73 - Manual (Page 25)

25
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
Switching the equalizer on/off
To switch the equalizer on/off,
➮
press the DEQ+ button
5
.
The equalizer menu is displayed.
To activate the equalizer,
➮
Press the softkey
4
assigned to
the “USER” or “PRE” display item
and select an equalizer.
To deactivate the equalizer,
➮
Press the softkey
4
assigned to
the “OFF” display item.
Automatically calibrating the
equalizer
You can electronically calibrate and
store values for three different situations.
EQ 1 for the driver only
EQ 2 for the driver and front
passenger
EQ 3 for the front and rear occupants
Hold the calibration microphone (avail-
able as an accessory) in the appropri-
ate position whilst the calibration is tak-
ing place.
The position of the calibration micro-
phone for situation 1 (e.g. for the driver
alone) is at the height of the driver's
head.
For situation 2, the calibration micro-
phone is between the driver and pas-
senger.
For Situation 3, it is in the middle of the
vehicle interior (left/right, front/back).
Really quiet surroundings are required
for the calibration. Any extraneous noise
will distort the measured values.
Note:
The sound radiating from the loud-
speakers must not be obstructed by any
objects. All the loudspeakers must be
connected. The microphone must be
connected to the unit.
To calibrate an equalizer,
➮
Press the DEQ+ button
5
.
➮
Press the softkey
4
assigned to
the “USER” display item.
➮
Press the softkey
4
assigned to
the display item of the equalizer
that you want to configure.
➮
Press the softkey
4
assigned to
the “AUTO” display item.
You will hear a test sound, and calibra-
tion takes place.
➮
Proceed as described for all the
equalizers.
Selecting an equalizer
After calibration has taken place or you
have finished making manual adjust-
ments,
➮
press the DEQ+ button
5
.
➮
Press the softkey
4
assigned to
the “USER” display item.
➮
Select one of the equalizers “EQ1”,
“EQ2” or “EQ3” using the corre-
sponding softkeys
4
.
➮
Press the joystick OK
7
or the
DEQ+ button
5
to close the
menu.
The settings are saved.
EQUALIZER