Blaupunkt MIAMI CD73 - Manual (Page 14)

14
Radio mode
Setting the tuner
To ensure that the tuner works proper-
ly, the device must be configured for
your region. You can choose between
Europe and the USA. By default, the
tuner is set to the region in which the
device was sold. If you experience prob-
lems with radio reception, please check
these settings.
➮
Press the MENU button
8
.
➮
Press the softkey
4
assigned to
the “SETP” display item.
➮
Press the softkey
4
assigned to
the “AREA” display item.
➮
Press the softkey
4
assigned to
the display item of the region that
you require: “EURO” or “USA”.
➮
Press the joystick OK
7
or the
MENU button
8
to close the
menu.
The settings are saved.
Switching to radio mode
If the device is in CD mode, cassette
mode, Multi-Media Card (MMC) mode
(depending on the car radio’s equip-
ment) or CD changer/Compact Drive
MP3 mode,
➮
press the TUNER button
<
.
The main radio menu for tuning into a
station is displayed. The radio mode
functions are controlled in the radio func-
tions menu. You can open the radio
functions menu by pressing the TUN-
ER button
<
in radio mode again. If
you are in any other mode, you can
open the radio functions menu by press-
ing the MENU button
8
followed by the
softkey
4
that is assigned to the
“TUNE” display item.
RDS function
This unit is equipped with an RDS radio
receiver. Some of the receivable FM
stations transmit a signal that not only
carries the programme but also addi-
tional information such as the station
name and programme type (PTY). The
station name appears in the display if
the radio can received it and the RDS
function is activated. You can optionally
display the programme type. For further
details, please read the section entitled
“Programme type (PTY)”.
Switching the RDS function on/off
To use the RDS function,
➮
press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
➮
Press the softkey
4
assigned to
the “RDS” display item.
“RDS ON” or “RDS OFF” appears briefly
in the display.
RADIO MODE