Blaupunkt MIAMI CD73 - Manual (Page 16)

16
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮
press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
➮
Press the NEXT button
3
.
➮
Press the softkey
4
assigned to
the “SENS” display item.
The display shows the currently set sen-
sitivity level. “SENS 6” is the highest
sensitivity setting and means the tuner
can receive distant stations. “SENS 1”
is the lowest setting.
➮
Move the joystick
7
up/right or
down/left to adjust the sensitivity.
➮
Press the joystick OK
7
or the
MENU button
8
to close the
menu.
The settings are saved.
Storing stations
Storing stations manually
➮
Select the required memory bank.
➮
Tune into the required station as
described in the section entitled
“Tuning into a station”.
➮
Press one of the six softkeys for
longer than two seconds to store
the station to that softkey.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT or AMT memory bank.
Note:
Any stations that were previously stored
in this memory bank are deleted in the
process.
Starting the Travelstore function
➮
press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
➮
Press the softkey
4
assigned to
the “TS” display item.
The station storing procedure begins.
“T-STORE” appears in the display. Af-
ter the process is completed, the sta-
tion stored in location 1 of the FMT or
AMT memory bank will be played.
Listening to stored stations
➮
Select the memory bank or wave-
band.
➮
Press the softkey
4
that is as-
signed to the name or frequency of
the station that you want to listen
to.
RADIO MODE