Condux Power Dart Blower 220 VAC - Manual (Page 3)

IMPORTANT SAFETY INSTRUCTIONS
BEFORE YOU USE THIS PRODUCT
Grounding Instructions
This 220 Volt Power Dart Blower should be grounded while in use to protect the
operator from electric shock. The Power Dart Blower is equipped with a 3-conductor
cord. It must be fitted with a 3-prong grounding type plug to fit the proper grounding
type receptacle. The green and yellow conductor in the cord is the grounding wire.
Never connect the green and yellow wire to a live terminal.
See Figure 1
1.
(220 Volt plug/outlet)
Figure 2 Properly grounded plug/outlet connections
Extension Cords
2. Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole
receptacles that accept the Power Dart Blower's plug.
SAVE THESE INSTRUCTIONS
Figure 1 Connection to Attachment Plug
Conductor with insulation having a green
and yellow striped outer surface.
Conductor not intended
to be grounded
(brown or blue conductor).
Conductor not intended to be grounded
(brown or blue conductor).