Comelit MT HDCAM360A - Manual (Page 7)

7
This 360° camera can be installed into different co nfiguration thanks to its rich
connection. You will have an overview of different scenario in the next pages.
A) Scenario without DVR
1. The camera uses the SDI connector output or the HDMI connector to
a HD-SDI monitor that has RS485 built in connector.
The user points the remote controller to the monitor and controls the
camera
2. The camera uses the SDI connector output or the HDMI connector to
a HD-SDI monitor that doesn’t have RS485 built in connector.
The user link the 2 RS485 wires from the camera to a keyboard
controller
B) Scenario with DVR
1. The DVR only supports SDI signal input
The camera used the SDI connector output to the DVR SDI input
The user link the 2 RS485 wires to the RS485 terminal of the DVR
The DVR uses the HDMI connector output to a HDMI monitor
The user controls the camera with the mouse or the remote controller
of the dvr
2. The DVR doesn’t have SDI signal input and only accepts analog
signal
The camera uses the 4 BNC connector output to the 4 video input of
the DVR.
The user can’t access to the 180° and 360° view
3. The DVR can accept both SDI and analog signal
The camera uses the SDI connector output to the DVR SDI input
The camera uses the 4 BNC connector output to the 4 video input of
the DVR
The user links the 2 RS485 wires to the RS485 terminal of the DVR or
to the RS485 terminal of the keyboard controller