Comelit FT CB 06 - Manual (Page 40)

GROUP S.P.A.
FT CB 06 38
6) MANAGING THE ACCESS CONTROL FUNCTION
6A) SUPERCODE
The supercode allows access to the ENTERING, CANCELLING and SEARCH for a
password code operations, which permits the relay on the porter module to be activated,
typically used as door opener. Its default value is 1997.
6B) CHANGING THE SUPERCODE
INITIAL CONDITION
Press the 0 key
followed by
Proceed to enter the
supercode by means of
the alphanumerical keypad
EXAMPLE: 1997
Press the key or
to confirm the code entered.
Select the ACCESS
CONTROL /SUPERCODE
menu.
Module supplied in
stand-by condition.
The module asks for
insertion of the supercode.
ON DISPLAY DESCRIPTION OPERATION
ENTER
TENANT CODE
Followed by:
SCROLL NAMES
SEARCH NAME
PASSWORD:
PASSWORD:
* * * *
NAME DIRECTORY
ACCESS CONTROL
NEW SUPERCODE:
_ _ _ _ _ _
6C) SETTING THE DEFAULT SUPERCODE
INITIAL CONDITION
Select the RESET
SUPERCODE.
Press the key
to confirm or
to cancel.
Module supplied with
terminal PR connected to
terminal – The module is under
programming:
to select the menu
▼▲ to scroll the menus
to return to the
previous menu
The default supercode
is set: 1997.
ON DISPLAY DESCRIPTION OPERATION
SYSTEM PARAMETERS
SELECT LANGUAGE
USER CODE SETTING
RESET SUPERCODE
Enter the new supercode
by means of the
alphanumerical keypad.
EXAMPLE: 1234
Press the key
to confirm the code
entered.
ON DISPLAY DESCRIPTION OPERATION
NEW SUPERCODE:
1 2 3 4 _ _
SUPERCODE
CHANGED