Comelit FT CB 06 - Manual (Page 30)

GROUP S.P.A.
FT CB 06 28
Press the key
to store the user name
and code
It is possible to proceed
to enter other users.
ON DISPLAY DESCRIPTION OPERATION
STORING IN
MEMORY...
_
* If the system is set with 6 digits it will be necessary to enter the number of the
block of flats before the user code EXAMPLE: 01 _ _ _ 1 (the block of flat num-
bers must have 2 digits as in the EXAMPLE)
Run software Art. 1249/A.
Consult the in-line
Guide for the settings
required. Press the
upload button inside
software Art. 1249/A.
On completion of the upload
(disconnect the wire before
starting to use the module).
If uploading is taking place
correctly.
If there are connection
problems.
ON DISPLAY DESCRIPTION OPERATION
Oppure:
UPLOAD
FAILED
UPLOAD
COMPLETED
Press the key or
to confirm the
code entered.
Select the NAME
DIRECTORY/ ENTERING
NAMES menu.
Proceed with user
name entry.
EXAMPLE:
ROSSI GIOVANNI
Press the key
to proceed to enter
the user code.
EXAMPLE: 1*
The module is ready
for name entry.
To cancel the character
to the left of the cursor,
press the X key, for special
characters key 9 .
The module asks for
insertion of the supercode.
ON DISPLAY DESCRIPTION OPERATION
NAME DIRECTORY
ACCESS CONTROL
_
ROSSI GIOVANNI_
CODE:_ _ _ 1
4D) ENTERING A NAME DIRECTLY FROM THE KEYPAD
INITIAL CONDITION
Press the 0 key
followed by
Proceed to enter the
supercode by means of the
alphanumerical keypad.
EXAMPLE: 1997
Module supplied in
stand-by condition
The module asks for
insertion of the supercode.
ON DISPLAY DESCRIPTION OPERATION
ENTER
TENANT CODE
Followed by:
SCROLL NAMES
SEARCH NAME
PASSWORD:
PASSWORD:
* * * *